- Thanks For Visit Samruddhi Engineering
- +91 - 94277 25460
- +91 - 94287 90025
- pramukhmanufacture@gmail.com
Technical Specification
| MODEL | NT-85 | ||||
|---|---|---|---|---|---|
| INJECTION UNIT | A | B | C | ||
| SCREW DIAMETER | MM | 32 | 35 | 38 | |
| SCREW L/D RATIO | -- | 22 | 20.1 | 18.5 | |
| SHOT SIZE(THEORETICAL) | CM3 | 133 | 160 | 190 | |
| INJECTION WEIGHT (PS) | GMS | 121 | 146 | 173 | |
| INJECTION PRESSURE | MPA | 203 | 170 | 144 | |
| SCREW SPEED | R/MIN | -- | 225 | -- | |
| CLAMPING UNIT | |||||
| CLAMP TONNAGE | KN | -- | 850 | -- | |
| TOGGLE STROKE | MM | -- | 320 | -- | |
| TIA BAR DIEMETER | MM | -- | 60 | -- | |
| SPACE BETWEEN TIA BARS | MM | -- | 360 X 340 | -- | |
| MAX. MOULD HEIGHT | MM | -- | 350 | -- | |
| MIN. MOULD HEIGHT | MM | -- | 150 | -- | |
| ENJECTOR STROKE | MM | -- | 90 | -- | |
| ENJECTOR TONNAGE | KN | -- | 30 | -- | |
| OTHERS | |||||
| MAX. PUMP PRESSURE | MPA | -- | 16 | -- | |
| PUMP MOTOR POWER | KW | -- | 11 | -- | |
| HETER POWER | KW | -- | 6.5 | -- | |
| MACHINE DIMENSTION(LXWXH) | M | -- | 3.9 X 1.2 X 1.8 | -- | |
| MACHINE WEIGHT | T | -- | 2.8 | -- | |
| MODEL | NT-100 | ||||
|---|---|---|---|---|---|
| INJECTION UNIT | A | B | C | ||
| SCREW DIAMETER | MM | 35 | 38 | 41 | |
| SCREW L/D RATIO | -- | 22 | 20.3 | 18.4 | |
| SHOT SIZE(THEORETICAL) | CM3 | 163 | 193.2 | 235 | |
| INJECTION WEIGHT (PS) | GMS | 148 | 176 | 214 | |
| INJECTION PRESSURE | MPA | 219 | 184 | 152 | |
| SCREW SPEED | R/MIN | -- | 210 | -- | |
| CLAMPING UNIT | |||||
| CLAMP TONNAGE | KN | -- | 1000 | -- | |
| TOGGLE STROKE | MM | -- | 350 | -- | |
| TIA BAR DIEMETER | MM | -- | 65 | -- | |
| SPACE BETWEEN TIA BARS | MM | -- | 370 X 370 | -- | |
| MAX. MOULD HEIGHT | MM | -- | 380 | -- | |
| MIN. MOULD HEIGHT | MM | -- | 150 | -- | |
| ENJECTOR STROKE | MM | -- | 120 | -- | |
| ENJECTOR TONNAGE | KN | -- | 38 | -- | |
| OTHERS | |||||
| MAX. PUMP PRESSURE | MPA | -- | 16 | -- | |
| PUMP MOTOR POWER | KW | -- | 13 | -- | |
| HETER POWER | KW | -- | 7.5 | -- | |
| MACHINE DIMENSTION(LXWXH) | M | -- | 4.3 X 1.3 X 2 | -- | |
| MACHINE WEIGHT | T | -- | 3.4 | -- | |
| MODEL | NT-130 | ||||
|---|---|---|---|---|---|
| INJECTION UNIT | A | B | C | ||
| SCREW DIAMETER | MM | 38 | 42 | 45 | |
| SCREW L/D RATIO | -- | 24 | 22 | 20.5 | |
| SHOT SIZE(THEORETICAL) | CM3 | 226 | 277 | 318 | |
| INJECTION WEIGHT (PS) | GMS | 206 | 252 | 289 | |
| INJECTION PRESSURE | MPA | 208 | 171 | 149 | |
| SCREW SPEED | R/MIN | -- | 185 | -- | |
| CLAMPING UNIT | |||||
| CLAMP TONNAGE | KN | -- | 1300 | -- | |
| TOGGLE STROKE | MM | -- | 380 | -- | |
| TIA BAR DIEMETER | MM | -- | 70 | -- | |
| SPACE BETWEEN TIA BARS | MM | -- | 420 X 420 | -- | |
| MAX. MOULD HEIGHT | MM | -- | 450 | -- | |
| MIN. MOULD HEIGHT | MM | -- | 160 | -- | |
| ENJECTOR STROKE | MM | -- | 140 | -- | |
| ENJECTOR TONNAGE | KN | -- | 50 | -- | |
| OTHERS | |||||
| MAX. PUMP PRESSURE | MPA | -- | 16 | -- | |
| PUMP MOTOR POWER | KW | -- | 13 | -- | |
| HETER POWER | KW | -- | 8 | -- | |
| MACHINE DIMENSTION(LXWXH) | M | -- | 4.6 X 1.5 X 2.1 | -- | |
| MACHINE WEIGHT | T | -- | 4 | -- | |
| MODEL | NT-170 | ||||
|---|---|---|---|---|---|
| INJECTION UNIT | A | B | C | ||
| SCREW DIAMETER | MM | 42 | 45 | 50 | |
| SCREW L/D RATIO | -- | 23.6 | 22 | 19.8 | |
| SHOT SIZE(THEORETICAL) | CM3 | 311 | 357 | 441 | |
| INJECTION WEIGHT (PS) | GMS | 283 | 325 | 402 | |
| INJECTION PRESSURE | MPA | 203 | 177 | 143 | |
| SCREW SPEED | R/MIN | -- | 180 | -- | |
| CLAMPING UNIT | |||||
| CLAMP TONNAGE | KN | -- | 1700 | -- | |
| TOGGLE STROKE | MM | -- | 435 | -- | |
| TIA BAR DIEMETER | MM | -- | 80 | -- | |
| SPACE BETWEEN TIA BARS | MM | -- | 470 X 470 | -- | |
| MAX. MOULD HEIGHT | MM | -- | 520 | -- | |
| MIN. MOULD HEIGHT | MM | -- | 180 | -- | |
| ENJECTOR STROKE | MM | -- | 140 | -- | |
| ENJECTOR TONNAGE | KN | -- | 50 | -- | |
| OTHERS | |||||
| MAX. PUMP PRESSURE | MPA | -- | 16 | -- | |
| PUMP MOTOR POWER | KW | -- | 18.5 | -- | |
| HETER POWER | KW | -- | 12.5 | -- | |
| MACHINE DIMENSTION(LXWXH) | M | -- | 5.1 X 1.5 X 2.2 | -- | |
| MACHINE WEIGHT | T | -- | 6 | -- | |
| MODEL | NT-220 | ||||
|---|---|---|---|---|---|
| INJECTION UNIT | A | B | C | ||
| SCREW DIAMETER | MM | 45 | 50 | 55 | |
| SCREW L/D RATIO | -- | 24.4 | 22 | 20 | |
| SHOT SIZE(THEORETICAL) | CM3 | 397 | 490 | 594 | |
| INJECTION WEIGHT (PS) | GMS | 362 | 446 | 540 | |
| INJECTION PRESSURE | MPA | 207 | 168 | 138 | |
| SCREW SPEED | R/MIN | -- | 155 | -- | |
| CLAMPING UNIT | |||||
| CLAMP TONNAGE | KN | -- | 2200 | -- | |
| TOGGLE STROKE | MM | -- | 475 | -- | |
| TIA BAR DIEMETER | MM | -- | 90 | -- | |
| SPACE BETWEEN TIA BARS | MM | -- | 520 X 520 | -- | |
| MAX. MOULD HEIGHT | MM | -- | 560 | -- | |
| MIN. MOULD HEIGHT | MM | -- | 200 | -- | |
| ENJECTOR STROKE | MM | -- | 150 | -- | |
| ENJECTOR TONNAGE | KN | -- | 70 | -- | |
| OTHERS | |||||
| MAX. PUMP PRESSURE | MPA | -- | 16 | -- | |
| PUMP MOTOR POWER | KW | -- | 18.5 | -- | |
| HETER POWER | KW | -- | 14 | -- | |
| MACHINE DIMENSTION(LXWXH) | M | -- | 5.7 X 1.6 X 2.3 | -- | |
| MACHINE WEIGHT | T | -- | 7 | -- | |
| MODEL | NT-260 | ||||
|---|---|---|---|---|---|
| INJECTION UNIT | A | B | C | ||
| SCREW DIAMETER | MM | 50 | 55 | 60 | |
| SCREW L/D RATIO | -- | 24 | 22 | 20.3 | |
| SHOT SIZE(THEORETICAL) | CM3 | 592 | 704 | 826 | |
| INJECTION WEIGHT (PS) | GMS | 539 | 641 | 752 | |
| INJECTION PRESSURE | MPA | 202.3 | 170 | 144.9 | |
| SCREW SPEED | R/MIN | -- | 220 | -- | |
| CLAMPING UNIT | |||||
| CLAMP TONNAGE | KN | -- | 2600 | -- | |
| TOGGLE STROKE | MM | -- | 540 | -- | |
| TIA BAR DIEMETER | MM | -- | 95 | -- | |
| SPACE BETWEEN TIA BARS | MM | -- | 570 X 570 | -- | |
| MAX. MOULD HEIGHT | MM | -- | 560 | -- | |
| MIN. MOULD HEIGHT | MM | -- | 200 | -- | |
| ENJECTOR STROKE | MM | -- | 150 | -- | |
| ENJECTOR TONNAGE | KN | -- | 70 | -- | |
| ENJECTOR NUMBER | -- | -- | 5 | -- | |
| OTHERS | |||||
| MAX. PUMP PRESSURE | MPA | -- | 16 | -- | |
| PUMP MOTOR POWER | KW | -- | 30 | -- | |
| HETER POWER | KW | -- | 19 | -- | |
| MACHINE DIMENSTION(LXWXH) | M | -- | 6.2 X 1.5 X 2.2 | -- | |
| MACHINE WEIGHT | T | -- | 8.3 | -- | |
| MODEL | NT-290 | ||||
|---|---|---|---|---|---|
| INJECTION UNIT | A | B | C | ||
| SCREW DIAMETER | MM | 55 | 60 | 65 | |
| SCREW L/D RATIO | -- | 24 | 22 | 20.3 | |
| SHOT SIZE(THEORETICAL) | CM3 | 676 | 805 | 945 | |
| INJECTION WEIGHT (PS) | GMS | 615 | 733 | 860 | |
| INJECTION PRESSURE | MPA | 202.3 | 170 | 144.9 | |
| SCREW SPEED | R/MIN | -- | 220 | -- | |
| CLAMPING UNIT | |||||
| CLAMP TONNAGE | KN | -- | 2900 | -- | |
| TOGGLE STROKE | MM | -- | 590 | -- | |
| TIA BAR DIEMETER | MM | -- | 100 | -- | |
| SPACE BETWEEN TIA BARS | MM | -- | 620 X 620 | -- | |
| MAX. MOULD HEIGHT | MM | -- | 630 | -- | |
| MIN. MOULD HEIGHT | MM | -- | 200 | -- | |
| ENJECTOR STROKE | MM | -- | 150 | -- | |
| ENJECTOR TONNAGE | KN | -- | 70 | -- | |
| ENJECTOR NUMBER | -- | -- | 5 | -- | |
| OTHERS | |||||
| MAX. PUMP PRESSURE | MPA | -- | 16 | -- | |
| PUMP MOTOR POWER | KW | -- | 30 | -- | |
| HETER POWER | KW | -- | 19 | -- | |
| MACHINE DIMENSTION(LXWXH) | M | -- | 6.3 X 1.7 X 2.4 | -- | |
| MACHINE WEIGHT | T | -- | 9.3 | -- | |
| MODEL | NT-350 | ||||
|---|---|---|---|---|---|
| INJECTION UNIT | A | B | C | ||
| SCREW DIAMETER | MM | 65 | 70 | 75 | |
| SCREW L/D RATIO | -- | 21.5 | 20 | 18.7 | |
| SHOT SIZE(THEORETICAL) | CM3 | 1161 | 1226 | 1407 | |
| INJECTION WEIGHT (PS) | GMS | 1057 | 1226 | 1407 | |
| INJECTION PRESSURE | MPA | 195 | 168 | 146 | |
| SCREW SPEED | R/MIN | -- | 160 | -- | |
| CLAMPING UNIT | |||||
| CLAMP TONNAGE | KN | -- | 3500 | -- | |
| TOGGLE STROKE | MM | -- | 670 | -- | |
| TIA BAR DIEMETER | MM | -- | 110 | -- | |
| SPACE BETWEEN TIA BARS | MM | -- | 710 X 630 | -- | |
| MAX. MOULD HEIGHT | MM | -- | 710 | -- | |
| MIN. MOULD HEIGHT | MM | -- | 260 | -- | |
| ENJECTOR STROKE | MM | -- | 200 | -- | |
| ENJECTOR TONNAGE | KN | -- | 90 | -- | |
| ENJECTOR NUMBER | -- | -- | 5 | -- | |
| OTHERS | |||||
| MAX. PUMP PRESSURE | MPA | -- | 16 | -- | |
| PUMP MOTOR POWER | KW | -- | 37 | -- | |
| HETER POWER | KW | -- | 24.5 | -- | |
| MACHINE DIMENSTION(LXWXH) | M | -- | 7.3 X 1.8 X 2.2 | -- | |
| MACHINE WEIGHT | T | -- | 12.5 | -- | |
| MODEL | NT-400 | ||||
|---|---|---|---|---|---|
| INJECTION UNIT | A | B | C | ||
| SCREW DIAMETER | MM | 70 | 75 | 80 | |
| SCREW L/D RATIO | -- | 21.4 | 20 | 18.8 | |
| SHOT SIZE(THEORETICAL) | CM3 | 1324 | 1520 | 1729 | |
| INJECTION WEIGHT (PS) | GMS | 1205 | 1383 | 1573 | |
| INJECTION PRESSURE | MPA | 199 | 173 | 152 | |
| SCREW SPEED | R/MIN | -- | 160 | -- | |
| CLAMPING UNIT | |||||
| CLAMP TONNAGE | KN | -- | 4000 | -- | |
| TOGGLE STROKE | MM | -- | 710 | -- | |
| TIA BAR DIEMETER | MM | -- | 120 | -- | |
| SPACE BETWEEN TIA BARS | MM | -- | 760 X 670 | -- | |
| MAX. MOULD HEIGHT | MM | -- | 780 | -- | |
| MIN. MOULD HEIGHT | MM | -- | 250 | -- | |
| ENJECTOR STROKE | MM | -- | 200 | -- | |
| ENJECTOR TONNAGE | KN | -- | 110 | -- | |
| ENJECTOR NUMBER | -- | -- | 9 | -- | |
| OTHERS | |||||
| MAX. PUMP PRESSURE | MPA | -- | 16 | -- | |
| PUMP MOTOR POWER | KW | -- | 37 | -- | |
| HETER POWER | KW | -- | 26 | -- | |
| MACHINE DIMENSTION(LXWXH) | M | -- | 7.3 X 1.96 X 2.41 | -- | |
| MACHINE WEIGHT | T | -- | 14.2 | -- | |
| MODEL | NT-450 | ||||
|---|---|---|---|---|---|
| INJECTION UNIT | A | B | C | ||
| SCREW DIAMETER | MM | 75 | 80 | 85 | |
| SCREW L/D RATIO | -- | 21.3 | 20 | 18.8 | |
| SHOT SIZE(THEORETICAL) | CM3 | 1679 | 1910 | 2156 | |
| INJECTION WEIGHT (PS) | GMS | 1528 | 1738 | 1962 | |
| INJECTION PRESSURE | MPA | 195 | 172 | 152 | |
| SCREW SPEED | R/MIN | -- | 155 | -- | |
| CLAMPING UNIT | |||||
| CLAMP TONNAGE | KN | -- | 4500 | -- | |
| TOGGLE STROKE | MM | -- | 760 | -- | |
| TIA BAR DIEMETER | MM | -- | 130 | -- | |
| SPACE BETWEEN TIA BARS | MM | -- | 800 X 720 | -- | |
| MAX. MOULD HEIGHT | MM | -- | 800 | -- | |
| MIN. MOULD HEIGHT | MM | -- | 300 | -- | |
| ENJECTOR STROKE | MM | -- | 200 | -- | |
| ENJECTOR TONNAGE | KN | -- | 110 | -- | |
| ENJECTOR NUMBER | -- | -- | 13 | -- | |
| OTHERS | |||||
| MAX. PUMP PRESSURE | MPA | -- | 16 | -- | |
| PUMP MOTOR POWER | KW | -- | 45 | -- | |
| HETER POWER | KW | -- | 34 | -- | |
| MACHINE DIMENSTION(LXWXH) | M | -- | 7.6 X 1.9 X 2.3 | -- | |
| MACHINE WEIGHT | T | -- | 18.8 | -- | |
| MODEL | NT-550 | |||||
|---|---|---|---|---|---|---|
| INJECTION UNIT | A | B | C | D | ||
| SCREW DIAMETER | MM | 80 | 85 | 90 | 95 | |
| SCREW L/D RATIO | -- | 23 | 21.1 | 19.5 | 18.8 | |
| SHOT SIZE(THEORETICAL) | CM3 | 2187 | 2468 | 2767 | 3082 | |
| INJECTION WEIGHT (PS) | GMS | 1990 | 2246 | 2518 | 2805 | |
| INJECTION PRESSURE | MPA | 188 | 167 | 149 | 134 | |
| SCREW SPEED | R/MIN | -- | 150 | -- | -- | |
| CLAMPING UNIT | ||||||
| CLAMP TONNAGE | KN | -- | 5500 | -- | -- | |
| TOGGLE STROKE | MM | -- | 900 | -- | -- | |
| TIA BAR DIEMETER | MM | -- | 150 | -- | -- | |
| SPACE BETWEEN TIA BARS | MM | -- | 900 X 820 | -- | -- | |
| MAX. MOULD HEIGHT | MM | -- | 850 | -- | -- | |
| MIN. MOULD HEIGHT | MM | -- | 350 | -- | -- | |
| ENJECTOR STROKE | MM | -- | 250 | -- | -- | |
| ENJECTOR TONNAGE | KN | -- | 250 | -- | -- | |
| OTHERS | ||||||
| MAX. PUMP PRESSURE | MPA | -- | 16 | -- | -- | |
| PUMP MOTOR POWER | KW | -- | 55 | -- | -- | |
| HETER POWER | KW | -- | 36 | -- | -- | |
| MACHINE DIMENSTION(LXWXH) | M | -- | 9.3 X 2.1 X 2.4 | -- | -- | |
| MACHINE WEIGHT | T | -- | 23 | -- | -- | |
| MODEL | NT-650 | |||||
|---|---|---|---|---|---|---|
| INJECTION UNIT | A | B | C | D | ||
| SCREW DIAMETER | MM | 85 | 90 | 95 | 100 | |
| SCREW L/D RATIO | -- | 22.3 | 21 | 19.9 | 18.9 | |
| SHOT SIZE(THEORETICAL) | CM3 | 2303 | 2582 | 2877 | 3188 | |
| INJECTION WEIGHT (PS) | GMS | 2096 | 2350 | 2618 | 2901 | |
| INJECTION PRESSURE | MPA | 206 | 184 | 164 | 149 | |
| SCREW SPEED | R/MIN | -- | 125 | -- | -- | |
| CLAMPING UNIT | ||||||
| CLAMP TONNAGE | KN | -- | 6500 | -- | -- | |
| TOGGLE STROKE | MM | -- | 930 | -- | -- | |
| TIA BAR DIEMETER | MM | -- | 160 | -- | -- | |
| SPACE BETWEEN TIA BARS | MM | -- | 960 X 880 | -- | -- | |
| MAX. MOULD HEIGHT | MM | -- | 900 | -- | -- | |
| MIN. MOULD HEIGHT | MM | -- | 350 | -- | -- | |
| ENJECTOR STROKE | MM | -- | 260 | -- | -- | |
| ENJECTOR TONNAGE | KN | -- | 200 | -- | -- | |
| OTHERS | ||||||
| MAX. PUMP PRESSURE | MPA | -- | 16 | -- | -- | |
| PUMP MOTOR POWER | KW | -- | 30 + 30 | -- | -- | |
| HETER POWER | KW | -- | 37.2 | -- | -- | |
| MACHINE DIMENSTION(LXWXH) | M | -- | 9.6 X 2.4 X 2.7 | -- | -- | |
| MACHINE WEIGHT | T | -- | 32 | -- | -- | |
| MODEL | NT-750 | |||||
|---|---|---|---|---|---|---|
| INJECTION UNIT | A | B | C | D | ||
| SCREW DIAMETER | MM | 90 | 95 | 105 | 110 | |
| SCREW L/D RATIO | -- | 23.2 | 22 | 19.9 | 19 | |
| SHOT SIZE(THEORETICAL) | CM3 | 2868 | 3195 | 3903 | 4283 | |
| INJECTION WEIGHT (PS) | GMS | 2610 | 2907 | 3552 | 3898 | |
| INJECTION PRESSURE | MPA | 195 | 175 | 143 | 131 | |
| SCREW SPEED | R/MIN | -- | 130 | -- | -- | |
| CLAMPING UNIT | ||||||
| CLAMP TONNAGE | KN | -- | 7500 | -- | -- | |
| TOGGLE STROKE | MM | -- | 1000 | -- | -- | |
| TIA BAR DIEMETER | MM | -- | 165 | -- | -- | |
| SPACE BETWEEN TIA BARS | MM | -- | 1000 X 940 | -- | -- | |
| MAX. MOULD HEIGHT | MM | -- | 1000 | -- | -- | |
| MIN. MOULD HEIGHT | MM | -- | 400 | -- | -- | |
| ENJECTOR STROKE | MM | -- | 300 | -- | -- | |
| ENJECTOR TONNAGE | KN | -- | 200 | -- | -- | |
| OTHERS | ||||||
| MAX. PUMP PRESSURE | MPA | -- | 16 | -- | -- | |
| PUMP MOTOR POWER | KW | -- | 30 + 37 | -- | -- | |
| HETER POWER | KW | -- | 49 | -- | -- | |
| MACHINE DIMENSTION(LXWXH) | M | -- | 10.6 X 2.6 X 2.8 | -- | -- | |
| MACHINE WEIGHT | T | -- | 39 | -- | -- | |